Product Overview

Description

The Black Rhino Dugger is a cast aluminum wheel in a Gun Black finish, offered here in 17, 18 and 20 in diameters. Priced per wheel, or as a set of 4.

Key features

  • Construction: Cast Aluminum
  • Finish: Gun Black
  • Diameters: 17, 18 and 20 in; widths: 8.5 and 9 in
  • Lug counts: 5 and 6
  • Load rating: 2,450 lbs per wheel

Specifications

Brand Black Rhino
Style Dugger
Finish Gun Black
Construction Cast Aluminum
Diameter 17, 18 and 20 in
Width 8.5 and 9 in
Bolt patterns 5x114.3, 5x127, 5x139.7, 6x114.3, 6x135, 6x139.7
Lug count 5 and 6
Offset -34 to +10 mm
Centerbore 66.06, 71.5, 76.1, 78.1, 87.1, 112.1 mm
Load rating 2,450 lbs
Beadlock No
Wheel weight 24.2–40.3 lbs
Set of 4 Four wheels

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Weight Part number Set of 4
17x8.5 5x127 5x5 -34 mm 3.41 in 71.5 mm 2,450 lbs 27.3 lbs 1785DGR-45127M71 4 × 1785DGR-45127M71
17x8.5 5x114.3 5x4.5 -18 mm 4.04 in 76.1 mm 2,450 lbs 26 lbs 1785DGR-85114M76 4 × 1785DGR-85114M76
17x8.5 5x127 5x5 -18 mm 4.04 in 71.5 mm 2,450 lbs 26 lbs 1785DGR-85127M71 4 × 1785DGR-85127M71
17x8.5 6x139.7 6x5.5 -18 mm 4.04 in 112.1 mm 2,450 lbs 26 lbs 1785DGR-86140M12 4 × 1785DGR-86140M12
17x8.5 5x139.7 5x5.5 +0 mm 4.75 in 78.1 mm 2,450 lbs 25.3 lbs 1785DGR005140M78 4 × 1785DGR005140M78
17x8.5 6x139.7 6x5.5 +0 mm 4.75 in 112.1 mm 2,450 lbs 25.1 lbs 1785DGR006140M12 4 × 1785DGR006140M12
17x8.5 6x114.3 6x4.5 +10 mm 5.14 in 66.06 mm 2,450 lbs 24.2 lbs 1785DGR106114M66 4 × 1785DGR106114M66
18x8.5 6x139.7 6x5.5 +0 mm 4.75 in 112.1 mm 2,450 lbs 27.3 lbs 1885DGR006140M12E 4 × 1885DGR006140M12E
20x9 5x139.7 5x5.5 +0 mm 5 in 78.1 mm 2,450 lbs 39.7 lbs 2090DGR005140M78 4 × 2090DGR005140M78
20x9 6x139.7 6x5.5 +0 mm 5 in 112.1 mm 2,450 lbs 39.8 lbs 2090DGR006140M12 4 × 2090DGR006140M12
20x9 6x114.3 6x4.5 +10 mm 5.39 in 66.06 mm 2,450 lbs 40.3 lbs 2090DGR106114M66 4 × 2090DGR106114M66
20x9 6x135 – +10 mm 5.39 in 87.1 mm 2,450 lbs 40.3 lbs 2090DGR106135M87 4 × 2090DGR106135M87

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us