Product Overview

Description

The American Force J03 Plague DRW is a monoblock forged wheel in a Polished finish, offered here in 22, 24 and 26 in diameters. Priced per wheel. Made to order. Lead time is confirmed after you order.

Key features

  • Construction: Monoblock Forged
  • Finish: Polished
  • Diameters: 22, 24 and 26 in; width: 8.25 in
  • Lug counts: 8 and 10
  • Load rating: 3,500 lbs per wheel

Specifications

Brand American Force
Style J03 Plague DRW
Finish Polished
Construction Monoblock Forged
Diameter 22, 24 and 26 in
Width 8.25 in
Bolt patterns 8x200, 8x210, 10x225
Lug count 8 and 10
Offset +141 to +145 mm
Centerbore 142, 154, 170, 225 mm
Load rating 3,500 lbs
Beadlock No

Sizes in this listing

Size Bolt pattern Offset Backspacing Centerbore Load rating Weight Part number
22x8.25 8x210 +145 mm 10.33 in 154 mm 3,500 lbs – AFDCJ03210-1-21
22x8.25 10x225 +141 mm 14.76 in 225 mm 3,500 lbs – AFDCJ03225-1-20
24x8.25 8x200 +145 mm 10.33 in 142 mm 3,500 lbs – AFDEJ03142-1-21
24x8.25 8x210 +145 mm 10.33 in 154 mm 3,500 lbs – AFDEJ03210-1-21
24x8.25 10x225 +145 mm 10.33 in 170 mm 3,500 lbs – AFDEJ03225-1-21
26x8.25 8x200 +145 mm 10.33 in 142 mm 3,500 lbs 46 lbs AFDFJ03142-1-21

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us