Product Overview

Description

The American Force 76 Blade SS is a monoblock forged wheel in a Polished finish, offered here in 24 in diameter. Priced per wheel. Made to order. Lead time is confirmed after you order.

Key features

  • Construction: Monoblock Forged
  • Finish: Polished
  • Diameter: 24 in; widths: 11, 12 and 14 in
  • Lug counts: 5, 6 and 8
  • Load rating: 3,500 lbs per wheel
  • Directional design: left and right wheels are separate part numbers

Specifications

Brand American Force
Style 76 Blade SS
Finish Polished
Construction Monoblock Forged
Diameter 24 in
Width 11, 12 and 14 in
Bolt patterns 5x127, 6x135, 6x139.7, 8x165.1, 8x170, 8x180
Lug count 5, 6 and 8
Offset -73 to +0 mm
Centerbore 78.1, 87, 87.1, 122, 122.4, 124, 124.2, 125, 125.1 mm
Load rating 3,500 lbs
Beadlock No

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Side Backspacing Centerbore Load rating Part number
24x11 6x135 – +0 mm Left 6 in 87 mm 3,500 lbs AFTM76LW87-1-21
24x11 6x135 – +0 mm Right 6 in 87 mm 3,500 lbs AFTM76RW87-1-21
24x11 6x139.7 6x5.5 +0 mm Left 6 in 78.1 mm 3,500 lbs AFTM76LR78-1-21
24x11 6x139.7 6x5.5 +0 mm Right 6 in 78.1 mm 3,500 lbs AFTM76RR78-1-21
24x11 8x165.1 8x6.5 +0 mm Left 6 in 122 mm 3,500 lbs AFTM76LD22-1-21
24x11 8x165.1 8x6.5 +0 mm Right 6 in 122 mm 3,500 lbs AFTM76RD22-1-21
24x11 8x170 – +0 mm Left 6 in 125 mm 3,500 lbs AFTM76LF25-1-21
24x11 8x170 – +0 mm Right 6 in 125 mm 3,500 lbs AFTM76RF25-1-21
24x11 8x180 – +0 mm Left 6 in 124 mm 3,500 lbs AFTM76LG24-1-21
24x11 8x180 – +0 mm Right 6 in 124 mm 3,500 lbs AFTM76RG24-1-21
24x12 6x139.7 6x5.5 -40 mm Left 4.93 in 78.1 mm 3,500 lbs AFTN76LR78-1-21
24x12 6x139.7 6x5.5 -40 mm Right 4.93 in 78.1 mm 3,500 lbs AFTN76RR78-1-21
24x12 8x165.1 8x6.5 -40 mm Left 4.93 in 122 mm 3,500 lbs AFTN76LD22-1-21
24x12 8x165.1 8x6.5 -40 mm Right 4.93 in 122 mm 3,500 lbs AFTN76RD22-1-21
24x12 8x170 – -40 mm Left 4.93 in 125 mm 3,500 lbs AFTN76LF25-1-21
24x12 8x170 – -40 mm Right 4.93 in 125 mm 3,500 lbs AFTN76RF25-1-21
24x12 8x180 – -40 mm Left 4.93 in 124 mm 3,500 lbs AFTN76LG24-1-21
24x12 8x180 – -40 mm Right 4.93 in 124 mm 3,500 lbs AFTN76RG24-1-21
24x14 5x127 5x5 -73 mm – 4.63 in 78.1 mm 3,500 lbs AFTP76S78-1-21
24x14 6x135 – -73 mm Left 4.63 in 87.1 mm 3,500 lbs AFTP76LW88-1-21
24x14 6x135 – -73 mm Right 4.63 in 87.1 mm 3,500 lbs AFTP76RW88-1-21
24x14 6x139.7 6x5.5 -73 mm Left 4.63 in 78.1 mm 3,500 lbs AFTP76LR80-1-21
24x14 6x139.7 6x5.5 -73 mm Right 4.63 in 78.1 mm 3,500 lbs AFTP76RR80-1-21
24x14 8x165.1 8x6.5 -73 mm Left 4.63 in 122.4 mm 3,500 lbs AFTP76LD22-1-21
24x14 8x165.1 8x6.5 -73 mm Right 4.63 in 122.4 mm 3,500 lbs AFTP76RD22-1-21
24x14 8x170 – -73 mm Left 4.63 in 125.1 mm 3,500 lbs AFTP76LF25-1-21
24x14 8x170 – -73 mm Right 4.63 in 125.1 mm 3,500 lbs AFTP76RF25-1-21
24x14 8x180 – -73 mm Left 4.63 in 124.2 mm 3,500 lbs AFTP76LG24-1-21
24x14 8x180 – -73 mm Right 4.63 in 124.2 mm 3,500 lbs AFTP76RG24-1-21

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us