Product Overview

Description

The American Force 601 Classic SSBR is a monoblock forged wheel in a Polished finish, offered here in 19.5, 20, 22, 22.5 and 24 in diameters. Priced per wheel. Made to order. Lead time is confirmed after you order.

Key features

  • Construction: Monoblock Forged
  • Finish: Polished
  • Diameters: 19.5, 20, 22, 22.5 and 24 in; widths: 6.75, 8.25, 10, 11 and 12 in
  • Lug counts: 6, 8 and 10
  • Load rating: 2,500–3,500 lbs per wheel, depending on size

Specifications

Brand American Force
Style 601 Classic SSBR
Finish Polished
Construction Monoblock Forged
Diameter 19.5, 20, 22, 22.5 and 24 in
Width 6.75, 8.25, 10, 11 and 12 in
Bolt patterns 6x135, 6x139.7, 8x165.1, 8x170, 8x180, 8x210, 10x225
Lug count 6, 8 and 10
Offset -40 to +145 mm
Centerbore 78.1, 87, 121.5, 122, 124, 125, 125.1, 154, 170, 170.1 mm
Load rating 2,500–3,500 lbs
Beadlock No

Sizes in this listing

Size Bolt pattern Bolt pattern (in) Offset Backspacing Centerbore Load rating Part number
19.5x6.75 8x165.1 8x6.5 +141 mm 9.43 in 121.5 mm 3,500 lbs AFDA01122-1-0
19.5x6.75 8x170 – +141 mm 9.43 in 125.1 mm 3,500 lbs AFDA01125-1-0
19.5x6.75 8x210 – +141 mm 9.43 in Not stated by supplier 3,500 lbs AFDA01210-1-0
19.5x6.75 10x225 – +141 mm 9.43 in 170.1 mm 3,500 lbs AFDA01225-1-0
20x10 6x135 – -25 mm 4.52 in 87 mm 3,500 lbs AFTD01W87-1-21
22x8.25 8x165.1 8x6.5 +145 mm 10.33 in 122 mm 3,500 lbs AFDC01122-1-21
22x11 8x165.1 8x6.5 +0 mm 6 in 122 mm 2,500 lbs AFTH601D22-1-21
22x12 6x139.7 6x5.5 -40 mm 4.93 in 78.1 mm 3,500 lbs AFTJ601R79-1-21
22x12 8x180 – -40 mm 4.93 in 124 mm 3,500 lbs AFTJ601G24-1-21
22.5x8.25 8x210 – +145 mm 10.33 in 154 mm 3,500 lbs AFDD01210-1-21
22.5x8.25 10x225 – +145 mm 10.33 in 170 mm 3,500 lbs AFDD01225-1-21
24x11 8x170 – +0 mm 6 in 125 mm 3,500 lbs AFTM01F25-1-21

Confirm bolt pattern, offset and load rating for your vehicle before ordering.

Free shipping on orders $150+

FAQs

Please read our FAQs page to find out more.

RMS vs. MAX power — which number do I actually care about?

RMS is what your gear handles continuously; MAX is the short burst it can survive without complaint. Match your amplifier's RMS output to your speakers' RMS rating — sizing off the MAX number is how magic smoke gets released.

What does the IP65 rating on DS18 marine gear actually mean?

It's dust-tight and rated against low-pressure water jets from any direction — built for spray, rain, and the occasional wave over the bow, not for full submersion. If something's going somewhere it could sit underwater, that's a different conversation entirely.

How do I match an amplifier to my speakers without guessing?

Add up the RMS rating of everything the amp will power, and pick an amp whose RMS output (at your speakers' impedance — usually 4-ohm) lands close to that total. Undersized is thin sound; wildly oversized is a fast way to blow a voice coil.

Can I mix marine-grade gear into a standard car audio setup, or the reverse?

You can run marine-grade gear in a car — it's just over-built for that environment, no downside besides cost. Running non-weatherproof car audio gear in an open UTV or boat is the direction that causes problems.

What gauge wiring kit do I need?

It scales with your amp's power draw and the length of the run — DS18's OFC kits come in 4-gauge and 8-gauge for a reason. Undersized wiring on a high-draw system is a voltage-drop and heat problem waiting to happen; when in doubt, size up.

Didn’t find your answer?

Don't hestitate to contact us